CONSISTENT PRINT QUALITY
Reduce your variables, 20% less deviation
Consistent printing quality is the target for all Flexo printers. Controlling the variables of the flexo process, such as pre-press, anilox, printing plate, cushion tape, printing pressure, ink transfer and cleanliness, helps to eliminate defects during printing.
Lead Lasers flexoperfect solutions, can help you to both eliminate many of the variables, and give you total control of the whole pre-press and printing process.
Here's just a few example of Our Solutions. Check out which solution works for you
DIGITAL GRAPHIC WORKFLOW
Direct Laser Engraving, uses a fully digital graphic workflow, to process a 1 bit tiff into a 3 dimensional relief image ready for laser imaging into the finished printing form. This ensures no process or operator influenced variation of the digital image through the pre-press process, resulting in exact reproduction of the client image on the finished print form. Imaging flexo printing forms using Direct CTP using the FlexoStar laser, provides FLEXOPERFECT pre-press solution. Read more in Our solutions
INK TRANSFER – FLEXO PRINT FORM
Whichever printing form you use, Photopolymer plate, In-the-round sleeve, direct laser engraved sleeve, the flexo print form, material, hardness and surface finish has a significant impact on ink transfer and cleanliness of the inking process between the anilox and substrate. Print forms can be optimized to suit ink type (water, solvent, UV) and substrate material (PET, PP, PE, Paper, foil).
Direct laser engraving of Elastomer sleeves & plates, provides a FLEXOPERFECT solution, by ensuring printers have a choice of sleeve and plate material, which can by optimized to give best ink transfer.
• Control the printing form
• Control the ink transfer
Flexo is a contact and pressure sensitive process. Increasing printing pressure influences ink transfer and has significant impact on print quality and performance and can cause a considerable number of print DEFECTS. Take a look at which FlexoPerfect solutions, can help you to eliminate these defects.
• Control the pressure
• Control the press
PRESS DYNAMICS & BALANCE
When printing at speeds, any variations in accuracy or out-of-balance of rotating parts, are magnified and can lead to vibrations. The higher the speed, the potentially worse the problem. Find out which FLEXOPERFECT solution, can eliminate out-of-balance effects caused by the image design and plate mounted on the surface of a high speed rotating sleeve.
TO READ MORE, PLEASE GO TO "OUR SOLUTIONS"
PRESS DYNAMICS & BALANCE
When printing at high speeds, any variations in accuracy or out-of-balance of rotating parts, are magnified and can lead to vibrations.Read more
Flexo is a contact and pressure sensitive process. Increasing printing pressure, influences ink transfer and has a significant impact on print quality and performanceRead more
INK TRANSFER - ANILOX
The shape and consistency of anilox cells makes a huge impact on ink transfer and cleanliness of the inking process to the printing plate.Read more
INK TRANSFER - FLEXO PRINT FORM
The flexo print form is a fundamental part of the printing process and has a significant impact on ink transfer and cleanliness of the inking process.Read more
Controlling the variables in the Pre-press of the flexo process, helps to eliminate variations and printing defects.Read more
Dried ink in anilox cells, can cause significant change in print densities. The FlexoStar laser can clean dried ink from even the smallest cells.Read more