FASTEST PRINTING SPEED
Optimise your high speed press up to 1000 m (3280 ft) per min
Optimising the performance of the flexo process, such as Ink transfer & printing pressure, and eliminating variables caused by plate mounting on cushion tape, and cleanliness of the printing process, is the target for all Flexo printers.
Ask yourself "what are the factors that cause me to print slower than my press is capable to achieve"
If your answer are Defects caused by
"Printing Pressure" variations
Poor "Ink transfer"
"Dirty anilox" resulting in too low or in-consistent print densities
"Vibration" or bouncing at high speed
LEAD LASERS HAS A SOLUTION FOR YOU
PRINTING PRESSURES
Flexo is a contact and pressure sensitive process. Increasing printing pressure, influences ink transfer and has a significant impact on print quality and performance
Read moreINK TRANSFER - ANILOX
The shape and consistency of anilox cells makes a huge impact on ink transfer and cleanliness of the inking process to the printing plate.
Read moreINK TRANSFER - FLEXO PRINT FORM
The flexo print form is a fundamental part of the printing process and has a significant impact on ink transfer and cleanliness of the inking process.
Read morePRE-PRESS
Controlling the variables in the Pre-press of the flexo process, helps to eliminate variations and printing defects.
Read moreDIRTY ANILOX
Dried ink in anilox cells, can cause significant change in print densities. The FlexoStar laser can clean dried ink from even the smallest cells.
Read morePRESS DYNAMICS & BALANCE
When printing at high speeds, any variations in accuracy or out-of-balance of rotating parts, are magnified and can lead to vibrations.
Read more
